Container Handling Solutions, Inc.

The Exclusive North American Swing Thru Distributor

 

1055 South 7th Street (Highway 251 South) Rochelle, IL  61068

 

Sales: Call Lee at 815-751-6666        Office 815-562-3119        Fax 815-562-5267

 

 

Email lee@wsint.com                      Web site http://www.SwingThruNA.com

 

Clearance Sale

 

2008 Demonstrator 10T Swing Thru 22,000 lb. lifting capacity double sided container handler, mounted on an Express Welding 41,000 lb. GVWR Trombone Trailer for loading 20’- 40’ containers

 

                                                                                               

 

 

 

·         Express Welding Trailer manufactured in Escanaba, MI

·         Twin Beam telescoping frame (20' to 40' variable container lengths possible)

·         Overall trailer length with a 20’ container is just under 28’, with a 40’ it is just under 48’

·         Gooseneck mounted air controls for lengthening and shortening of trailer

·         Drop in 5th wheel Kingpin with (2) locations 60" & 84"

·         (2) Speed Landing Gear

·         255/70R22.5 radial tires on steel bud type wheels

·         Dual, 25,000 lb. axles, with oil bath hubs, air ride suspension and 60" axle spacing

·         Air suspension dump valve at the rear of the trailer, for loading heavy containers

·         ISO Twist Lock style container tiedowns (rear telescopes up & down)

·         (2) Twist Lock extensions for front on containers without a gooseneck tunnel

·         Rear bumper has brake & turn LED signals, strobe LED’s, 3-center LED I lights

·         Side marker LED’s, license plate lamp, and floodlights on rear corners 

·         Mid-span marker LED’s on front end of rear telescoping tube

·         Side marker LED’s on end of front twist lock support arm

·         E-Chain inside of the sliding tubes with hoses and electrical wiring

·         Right side has large wire basket, left side a small wire basket with locking toolbox

·         Black poly fenders

·         STD paint for trailer is black

 

·         10T Swing Thru Fixed Crane System with 22,000 lb. lift capacity hydraulic operated booms

·         3/8” Grade 100 lifting chains with shorting elements and ISO container lifting lugs

·         Hydraulic stabilizing legs mounted on sliding outriggers at all 4 corners

·         Manually operated hydraulic boom controls are mounted at both rear corners of the trailer for better visibility

·         Hydraulic cylinders have pilot operated check valves, or counter balance valves to ensure smooth operation and safety against hose failure or cylinder creep

·         With a 48" 5th wheel height, the cranes mounting height is 53.5" off the ground

·         With a 48" 5th wheel height and the booms in the parked position, the transport height is 13'6" (Parked position means the head of boom is flush with side of container)

·         With a 48” 5th wheel height, a 40’ high cube with the container tunnel straddling the trailers goose neck  transport height is 13'6"  (Doors to rear)

·          24HP Honda 4 cycle air cooled Gas engine with 12 volt electric starter provides the power for

“APU“self contained hydraulic system with double hydraulic pumps, oil reservoir and filter

·         Overall weight is 19,500 lbs. (Trailer, 10T Swing Thru and gas powered APU)

·         Swing Thru is painted white

 

This Swing Thru and trailer has been Container Handling Solutions, Inc. demonstrator which was used for local delivery and photos. There is no hour meter, but we estimate only 10 to 15 hours of use.  This unit is like new and ready to go to work.

 

Blow out Price is $135,000.00 Plus Taxes, FOB Rochelle, IL

 

 

 

 

Used 10T Swing Thru 22,000 lb. lifting capacity, double sided container handler, mounted on an Etnyre 39,740 lb. GVWR Sliding Trailer for loading 40’- 45’-48’ containers

 

 

 

                                       Trailer is shown set for handling a 40’ shipping container

 

           

              

               Manual lever for adjusting trailer length         24HP gas Honda powered self contained “APU”

 

  • Etnyre Trailer manufactured in Oregon, IL
  • Telescoping frame 40'- 45’- 48' container lengths
  • Overall trailer length with 40’ container is 45’, with 48’ container it is 53’
  • 84” Swing clearance
  • Telescoping pin and hole load bearing landing gear
  • 255/70R22.5 radial tires on steel bud type wheels
  • Dual, 22,280 lb. axles, with oil bath hubs, spring suspension with 60" axle spacing

·         Rear bumper has brake & turn LED signals, 3-center LED’s, license plate lamp

  • E-Chain inside of the sliding tubes with hoses and electrical wiring
  • Black metal fenders
  • Trailer is black

 

  • 10T Swing Thru Fixed Crane System with 22,000 lb lift capacity hydraulic operated booms
  • 3/8” Grade 100 lifting chains with shorting elements and ISO container lifting lugs
  • Hydraulic stabilizing legs are mounted on sliding outriggers at all 4 corners
  • Manual operated hydraulic boom controls are mounted at both rear corners of the trailer for better visibility
  • Hydraulic cylinders have pilot operated check valves, or counter balance valves to ensure smooth operation and safety against hose failure or cylinder creep
  • With a 48” 5th wheel height, a 40’ high cube with the container tunnel straddling the trailers gooseneck transport height is 13'6"(Doors to rear)  
  • “APU” self contained hydraulic system with double hydraulic pumps, oil reservoir and filter. With a 24HP Honda 4 cycle air cooled Gas engine with 12 volt electric
  • Swing Thru is painted white

 

This Swing Thru and trailer has been Container Handling Solutions, Inc. demonstrator and local delivery unit. There is no hour meter but we estimate 20 hours of use.

 

Paint is a little faded but not real bad. Everything works and it is ready to use. A new Swing Thru and trailer just like this would sell for $ 155,000.00

 

 

Blow out Price is $115,000.00 Plus Taxes, FOB Rochelle, IL

 

 

 

 

 

 

New 10T Swing Thru 22,000 lb. lifting capacity, double sided container handler, with dedicated fixed mounting for a truck or trailer

 

 

 

·         NEW 10T Swing Thru Fixed Crane System with 22,000 lb. lift capacity hydraulic operated booms

·         3/8” Grade 100 lifting chains with shorting elements and ISO container lifting lugs

·         Hydraulic stabilizing legs mounted on sliding outriggers at all 4 corners

·         Manually operated hydraulic boom controls are mounted at both rear corners of the truck bed or the trailer for better visibility

·         Hydraulic cylinders have pilot operated check valves, or counter balance valves to ensure smooth operation and safety against hose failure or cylinder creep

·         STD Swing Thru paint is white

·         These crane sets can be mounted on a straight truck or trailer

·         Crane sets require a double hydraulic pump

·         Either a PTO driven hydraulic system that runs off the truck transmission, or a self contained hydraulic system with its own “APU” power supply is required

 

 

 

 

Flat deck with ISO Twist Locks mounted into the flat deck                No deck with ISO Twist Locks mounted to the truck frame

                                                                                                                                               

                               

                                                                                                                         

             

 

Pull a trailer with another 20’ container, just unhook and lift                Advantage of a double sided side loader, load without moving

 

Price is without any hydraulic system or hoses running between crane sets.  Price does include the hydraulic control valve, but without hoses and cable controlled slave controls.  The photos above are examples of how you can mount a fixed Swing Thru to a straight truck.

 

Blow out Price is $81,127.00 Plus Taxes, FOB Rochelle, IL

 

 

 

 

 

Used 27T Swing Thru 60,000 lb. lifting capacity double sided container handler, mounted on an Express Welding 96,000 Lb. GVWR Trombone Trailer for loading 20’- 40’ containers

 

 

 

 

 

Express Welding Trailer manufactured in Escanaba, MI                                      

  • Twin Beam telescoping frame (20' to 40' variable container lengths possible)
  • Designed for a 48” 5th wheel height
  • Overall trailer length with 20’ container and APU is 30’8”, with 40’ it is 50’8”
  • Gooseneck mounted air control for lengthening and shortening trailer from 20’- 40’ containers
  • 84” 5th  wheel swing clearance

·         (2) Speed Landing Gear

  • 275/70R22.5 Radial tires on 10 bolt stud piloted steel bud type wheels

·         Dual, 25,000 lb. axles with oil bath hubs, air ride suspension and 109” axle spacing

·         Air suspension dump valve at the rear of the trailer, for loading heavy containers

  • Twist Lock style container securements

·         (4) Twist Lock extensions for containers without gooseneck tunnels

·         Rear Bumper has brake & turn LED signals, strobe LED’s, 3-center LED ID lights, side marker LED’s, license plate lamp, and floodlights on rear corners 

  • Mid-span marker LED’s on front end of rear telescoping tube
  • Side marker LED’s on end of front twist lock support arm
  • Right side storage basket, left side storage area with a locking toolbox
  • Trailer is painted black, with black poly fenders

 

·         27T Swing Thru Fixed Crane System with hydraulic operated booms

·         5/8” Grade 80 lifting chains with shorting elements and ISO container lifting lugs

  • Manually controlled hydraulic stabilizing legs are located at all four corners of crane sets,

(2) Slam down stabilizing legs and (2) over-the-deck stabilizing legs.  Over-the-deck legs allows         another chassis to be backed under the legs for loading

  • Safety: Stabilizer leg minimum pressure system lights up when legs are properly deployed
  • Safety: Load Security system at 90% of rated lift amber lights will illuminate. At 100% partial system cut out will activate with audible alarm and red light. When overload is detected the operator can rest the machine by retracting the boom load
  • Safety: Hydraulic cylinders have pilot operated check valves, or counter balance valves to ensure smooth operation and safety against hose failure or cylinder creep

·         Manually operated hydraulic boom controls are mounted at both rear corners of the trailer

  • Transport height with a STD container on a 48" 5th  wheel height and booms in parked position is 13'6" (Parked position means head of boom off to the side, but no wider then 102”)
  • Transport height with a 40’ high cube (with the container tunnel straddling the gooseneck) is 13'6" with a 48” 5th  wheel height
  • Self contained hydraulic system with double hydraulic pumps, oil reservoir and filter. A liquid cooled 52 HP Isuzu diesel engine with 12 volt electric starter
  • Overall weight is 31,600 lbs

 

This Swing Thru has only 45 engine hours of use, everything works and it is ready to go to work.

 

                

 

27T Express Welding 20-40’ trailer hauling a 40’ container        Over-the-deck leg allows for loading chassis

 

Blow out Price is $245,000.00 Plus Taxes, FOB Rochelle, IL